Installation

Pre wet the surface. Open bucket, cut open vacuum-sealed bag, and spread material evenly over the surface.

Verarbeitung
Verarbeitung
Verarbeitung
Verarbeitung

Work material evenly into the joints with a soft to medium broom or brush. Rinse the area with a gentle stream of water to compress material into the joints. Do not direct a strong jet of water into the joints. Once the water flow is stopped the curing process begins.

Any residue remaining on the surface can be removed by gently brushing diagonally across the joints. Once the surface is dry, sweep away and discard any remaining loose residual material.

Note: Do not sweep residual material into open joints.